How to Choose Rolling Paper Size: RFQ in mm
How to choose rolling paper size for OEM is a millimetre list, not Zigzag’s “start with 1¼.” Ace quotes booklets at about USD $0.07–$0.30, MOQ applies. A booklet rectangle is not a 109 mm cone. I write L×W. I do not write “beginner size.”
Read this to build a size ladder. King-only mm is the sister page.
Why C-end Guides Start at 1¼
I searched “How to choose rolling paper size.” Zigzag’s 2022 size guide is first. They tell new rollers to start at 1¼ because it is easy to handle, then size up for groups. That is a session story.
How to choose rolling paper size for OEM is the opposite order: destination shelf, then mm, then how many SKUs you will stock. Their burn-and-sharing chart does not set a factory MOQ.
| Zigzag advice | Factory translation |
|---|---|
| Start 1¼ | Only if the shelf photo is 1¼ |
| King for groups | King leaf ≠ 109 mm cone |
| Single wide for solo | Short booklet SKU |
| One favourite size | Brands usually need a ladder |
The Factory Size Ladder
Common booklet rows I actually quote: ~70 × 36–38 (single wide), ~78 × 44 (1¼), ~78 × 60 (1½), ~110 × 55–60 (king), ~110 × 42–46 (king slim). Those millimetres follow the same chart Zigzag published. I still want your competitor sample.
I’ve seen “just copy RAW king” POs that meant slim. I’ll ask for a leaf on a ruler.
Booklet Versus Cone
How to choose rolling paper size for OEM if the mood board is a pre-roll? You are on the cone chart: 84 / 98 / 109 mm empties at about USD $0.04–$0.06. Do not drop 109 into a booklet cell.
In my experience mixed charts are how the wrong carton ships.
How to Pick Without Guessing
Photograph the competitor booklet on graph paper. Write L×W. Add leaves, gum, GSM, fibre, print. Hengfeng-backed base paper, ISO 9001:2015, FSC optional.
Tank pages: papeles de liar personalizados, OEM, conos prerrollados. Quote: https://ace-rolling.com/contect/.
I quote the ladder you circled. I do not invent a “best size.”
What Ace Needs on the Brief
A table, not a paragraph. One row per SKU.
| SKU name | L×W mm | Formato | Notas |
|---|---|---|---|
| Daily | 78 × 44 | Folleto | 1¼ class |
| Fiesta | 110 × 44 | Folleto | Slim king |
| Fill | 109 | Empty cone | Different band |
How to choose rolling paper size for OEM after that table is just a quote. Skip the lifestyle copy. If legal wants one English size name on the wrap, I still keep millimetres on the PO.
Preguntas frecuentes
Should every brand start with 1¼?
No. How to choose rolling paper size for OEM starts from the shelf you already sell, not Zigzag’s beginner tip. If the photo is king slim, I quote ~110 × 42–46 mm. I have forced 1¼ only when the buyer sent that sample. Send the photo. I will not assign a starter size.
Can I use one size for papers and cones?
No. How to choose rolling paper size for OEM is two charts. Booklets are L×W. Cones are 84 / 98 / 109 mm empties. I’ve seen “king” wreck both POs. Write two tables. Ace quotes two bands. Do not merge them.
Does longer always mean slower?
Zigzag implies longer sessions. How to choose rolling paper size for OEM still cannot promise burn. GSM and fill matter. I will not print “slow king” on a wrap. Pick mm for the shelf. Ask for a sample burn on your own grind.
How many sizes should I stock?
Most brands need a ladder, not one romantic size. How to choose rolling paper size for OEM is a SKU count you can refill. Two booklet sizes plus one cone is common. I’ll ask what the retailer already shelves. Then I quote those rectangles, about USD $0.07–$0.30 per booklet, MOQ applies.
What if I only have a nickname, not mm?
Send a sample or a ruler photo. How to choose rolling paper size for OEM cannot run on “regular” or “big.” I will wait. Nickname-only POs are how slim and wide kings swap. Measure once. I quote after the numbers exist.
