Gängige Planungsziele sind etwa 0,5 g für 84 mm, 0,5–0,75 g für 98 mm und etwa 1 g oder mehr für 109 mm Kegel. Dies sind Marktausgangspunkte, keine Garantien: Materialdichte, Mahlgrad, Spitzengeometrie, Packung und Füllausrüstung bestimmen das validierte Produktionsgewicht.
Dieser B2B-Leitfaden hilft Private-Label-Teams bei der Auswahl einer Kegelspezifikation und der Erstellung eines wiederholbaren Füllgewichtsplans. Er enthält keine Anweisungen für Verbraucher zum Rauchen. Ace Rolling liefert gängige 84, 98 und 109 mm Routen sowie kundenspezifische Kegel aus Dongguan, China.
Welches Füllgewicht sollten Käufer nach Kegelgröße planen?
Länge ist nur die erste Koordinate in einer Kegelspezifikation. Ein glaubwürdiges Ziel umfasst auch den oberen Durchmesser, die Spitzenlänge und den -durchmesser, die Verjüngung, das Papier, die Naht und den nutzbaren Hohlraum über dem Filter.
Die Größentabelle der Cones Factory beschreibt 84 mm bei etwa 0,5 g, einen Standard-98-mm-Kegel bei etwa 0,75 g, einen schlanken 98-mm-Kegel bei etwa 0,5 g und 109 mm bei etwa 1 g. Andere Marktführer veröffentlichen breitere Bänder, einschließlich 109-mm-Füllungen über 1 g. Schreiben Sie diese Zahlen Marktformaten zu; machen Sie sie nicht zu einer universellen Ace-Kapazitätsbehauptung.
| Gängiges Format | Marktplanungsgespräch | Haupt-B2B-Verwendung | Muss validiert werden |
|---|---|---|---|
| 84 mm | Etwa 0,5 g | Halbe-Gramm-Einzelstücke und Multipacks | Dichte, Spitze, Schließkopfraum |
| 98 mm schlank | Etwa 0,5 g | Schlanke Premium-Positionierung | Durchmesser und Maschinenwerkzeuge |
| 98 mm Standard | Etwa 0,75 g | Mittelgewicht-SKU | Verjüngung, Packdichte, Finish |
| 109 mm | Etwa 1 g; einige Formate höher | Flaggschiff-Vollgramm-Linie | Tatsächlicher Hohlraum und Maschinenrezept |
| Individuell | Projektspezifisch | Exklusive Packungsarchitektur | Vollständige Zeichnung und gefüllter Versuch |
Überprüfen Sie verfügbare Geometrien unter https://ace-rolling.com/pre-rolled-cones/ und fordern Sie eine Maßzeichnung an, bevor Sie Entscheidungen zu Artwork oder Füllwerkzeugen treffen.
Wesentliche Erkenntnis: Verwenden Sie vertraute Gewichtsetiketten, um die Vorgabe zu formulieren, genehmigen Sie den fertigen Kegel jedoch anhand von Abmessungen und gemessenen Füllversuchen.
Warum kann derselbe Kegel unterschiedliche Grammgewichte halten?
Gramm messen Masse; ein Kegelhohlraum bietet Volumen. Die Umrechnung ändert sich, wenn die Schüttdichte, Partikelverteilung, Feuchtigkeitszustand oder Packkraft des Eingangsmaterials sich ändert.
Ein optisch voller Kegel kann bei zwei Materialchargen unterschiedlich wiegen. Feines Material kann sich anders absetzen als grobes Mahlgut, während Vibration und Stampfen die Dichte entlang des Kegels verändern können. B2B-Betreiber sollten daher einen Betriebsbereich qualifizieren, nicht einer theoretischen Kapazitätszahl nachjagen.
| Variabel | Was es ändert | Käuferkontrolle |
|---|---|---|
| Schüttdichte | Masse, die den Hohlraum einnimmt | Repräsentative Produktionschargen testen |
| Partikelverteilung | Fließen und Absetzen | Mahlgitterbereich definieren |
| Feuchtigkeitszustand | Gewicht und Handhabung | Aufzeichnung der Konditionierung während des Versuchs |
| Packenergie | Dichtegradient | Maschineneinstellungen sperren |
| Spitzengeometrie | Verfügbarer Hohlraum | Spitzenabmessungen einfrieren |
| Closing allowance | Saleable finish | Define required headspace |
Ace’s https://ace-rolling.com/oem-odm-rolling-paper-manufacturer/ program can work from a written fill brief, but the brand or filler remains responsible for validating its own material and legal label weight.
Wesentliche Erkenntnis: Cone capacity is a volume-to-mass calibration problem; the same length does not guarantee the same gram result.
How Should Machine-Fill Buyers Set a Target?
Machine-fill planning begins with the intended filler, tray or adapter, then works backward to cone dimensions and process tolerances. A cone that fills well by hand may not index, drop, vibrate, or close consistently at production speed.
Run a designed trial at low, nominal, and high target weights. Record rejects for wrinkles, seam damage, underfill, overflow, uneven settlement, tip deformation, and closing defects. Weigh every trial unit or a statistically justified sample, then use actual data to set the acceptable operating window.
| Trial stage | Input to lock | Output to record | Release question |
|---|---|---|---|
| Tool fit | Cone and tip dimensions | Feeding and seating faults | Does it index without damage? |
| Low weight | Minimum recipe | Shape and closure | Is the pack commercially acceptable? |
| Nominal weight | Planned label weight | Mean and variation | Is the process centered? |
| High weight | Upper recipe | Overflow and seam stress | Is there safe process margin? |
| Speed run | Intended throughput | Reject rate and drift | Does performance hold over time? |
Send machine make, tooling dimensions, fill method, and target weight when contacting https://ace-rolling.com/pre-rolled-cones/.
Wesentliche Erkenntnis: Select the cone and machine recipe together; nominal grams alone cannot establish production compatibility.
Which Paper, Tip, and Print Choices Affect Filling?
Paper and tip choices are not merely visual. Stiffness, friction, seam construction, print coverage, filter material, and dimensional tolerances can affect feeding and the condition of the cone after filling.
Ace routes can include white, unbleached, hemp, flax, bamboo, wood pulp, custom-color, or printed paper. Tip options may include paper and project-suitable glass, wood, ceramic, or custom formats. Availability and machine suitability depend on the exact order; none should be assumed interchangeable without samples.
| Specification choice | Possible production effect | Genehmigungsnachweis |
|---|---|---|
| Papierroute | Friction, stiffness, visual fill line | Matched filled samples |
| Printed paper | Surface and artwork registration | Speed trial and print proof |
| Paper tip | Familiar tooling behavior | Diameter/tolerance report |
| Alternative tip | Weight and feeding change | Dedicated tool-fit trial |
| Kundenspezifische Farbe | Visual QC requirements | Signed color standard |
| Seam construction | Resistance during filling | Filled-retained sample |
Use https://ace-rolling.com/quality-certifications/ to frame material and QC document requests for the exact SKU.
Wesentliche Erkenntnis: Treat paper, print, seam, and tip as functional fill inputs, not interchangeable decoration.
What Sample Plan Prevents Underfill and Overfill?
A sample plan should reproduce production conditions closely enough to reveal variation before retail cartons and labels are committed. One attractive empty cone is not a fill-weight approval.
Request dimensional samples, then conduct filled trials using representative material lots and the intended machine. Define nominal weight, permitted variation, closure style, headspace, finished length, appearance, and reject criteria. Retain signed samples from the selected condition for incoming and reorder comparison.
| Sample gate | Quantity purpose | Buyer decision | Failure signal |
|---|---|---|---|
| Empty cone review | Check dimensions and construction | Tooling shortlist | Poor fit or seam damage |
| Material-lot trial | Expose density variation | Weight window | Large lot-to-lot shift |
| Machine speed run | Test repeatability | Production recipe | Reject rate rises with speed |
| Packed mock-up | Check retail fit | Carton/tube approval | Closure changes pack height |
| Retained standard | Control reorders | Final release | No signed physical reference |
Ace manufactures in Dongguan under an ISO 9001:2015 management framework; buyers can discuss the appropriate inspection plan through https://ace-rolling.com/about-factory/.
Wesentliche Erkenntnis: Approve a filled, packed, machine-tested standard—not an empty cone and an estimated gram number.
How Do MOQ and Unit Cost Shape the Weight Strategy?
Fill-weight architecture affects the number of finished retail units obtainable from a material budget, while cone dimensions affect packaging, freight, filling speed, and shelf price. Model the whole SKU before selecting the largest possible format.
Ace wholesale pre-rolled cones are approved for planning at about $0,04–$0,06 pro Cone, with MOQ commonly starting from 2,000+. Final price and minimum depend on size, paper, print, filter, packaging, quantity, and other specifications. These are factory wholesale references, not retail prices or a promised quote.
| Kommerzieller Input | Planning reference | What moves it | Käuferaktion |
|---|---|---|---|
| Kegel-Stückpreis | Etwa $0,04–$0,06 | Size, material, print, tip, pack, volume | Request matched quotes |
| MOQ | Üblicherweise 2.000+ | Custom depth and packaging | Confirm per SKU |
| Fill target | About 0.5–1.5 g+ market talk | Geometry and material density | Validate trial window |
| Einzelhandelsverpackung | Single or multipack | Finished length and closure | Build packed prototype |
| Landed cost | Quote-specific | Freight, duty, cartons | Compare delivered economics |
Submit dimensions, target grams, machine, paper, tip, pack, quantity, and destination at https://ace-rolling.com/contact/.
Wesentliche Erkenntnis: Choose fill weight by sell-through and landed unit economics, then confirm the cone price and MOQ against one locked specification.
What Should the Final OEM Cone Brief Include?
The best RFQ removes ambiguity before the supplier quotes, samples, or reserves production. “A one-gram cone” is not enough because different geometries and materials can carry the same marketing label.
State cone length, top diameter, tip dimensions and material, paper route, color, print, target fill range, input density data, machine model, closure method, pack count, carton format, quantity, destination, and required documents. Ace is a private-label manufacturer and does not manufacture RAW products or imply affiliation with RAW.
| Anfragefeld | Example of useful detail | Warum es wichtig ist |
|---|---|---|
| Geometry | 84/98/109 mm or drawing | Defines cavity and tooling fit |
| Fill plan | Nominal plus acceptable window | Guides sample trial |
| Material input | Density range and grind control | Explains weight variation |
| Machine | Make, model, tray/adapter | Screens compatibility |
| Branding | Plain, color, or printed | Defines proof and setup |
| Verpackung | Bulk, jar, box, display, carton | Sets finished dimensions |
| Compliance | Destination and document list | Prevents unsupported claims |
Compare standard and custom routes at https://ace-rolling.com/pre-rolled-cones/ before requesting a formal quotation.
Wesentliche Erkenntnis: A complete OEM brief converts “how many grams?” into a measurable cone, machine, packaging, and QC program.
FAQ
How many grams go in an 84 mm pre-rolled cone?
An 84 mm pre-rolled cone is commonly discussed as a roughly 0.5 g format in market size guides. That figure is a planning reference, not guaranteed capacity. The filler should validate its own material density, grind, moisture condition, packing settings, tip geometry, closing allowance, finished appearance, and label-weight tolerance.
How many grams go in a 98 mm pre-rolled cone?
A standard 98 mm pre-rolled cone is often positioned around 0.75 g, while slimmer 98 mm formats may target about 0.5 g. Diameter and taper matter as much as length. Buyers should request a dimensional drawing and test the intended cone on their production material and filling equipment.
How many grams go in a 109 mm pre-rolled cone?
A 109 mm pre-rolled cone is commonly marketed around a 1 g fill, although broader market guides discuss ranges extending above that for certain geometries. Do not assume every 109 mm cone is identical. Validate top diameter, tip length, packing density, closure, machine settings, and finished weight variation.
Can Ace Rolling make cones for automatic filling machines?
Ace Rolling supplies private-label and wholesale cone programs for automatic-filling supply chains, subject to project specifications. Send the machine make and model, tray or adapter dimensions, cone geometry, target fill window, paper and tip requirements, closing method, packaging, quantity, and destination so machine-fit samples can be evaluated before production.
What is the MOQ and wholesale price for custom cones?
Ace Rolling cone programs commonly start from about 2,000+ units, depending on size, paper, print, filter, packaging, and quantity. The approved factory wholesale planning range is about $0.04–$0.06 per cone, with MOQ applying. Final pricing requires a written quote for the locked specification and destination.
How do I request a cone fill-weight sample plan?
Send your target weight range, cone size or drawing, material density data, grind controls, filling machine, tip specification, closure, packaging, quantity, destination, and required documents. Start at https://ace-rolling.com/contact/ and ask for empty dimensional samples followed by representative machine-filled trials and a retained approval standard.
