王者尺寸 vs 1 1/4 vs 细长锥形批发？ 首先根据目标填充重量和包装尺寸匹配毫米长度和尖端长度——然后在你的填充机上取样——之后再印刷私人标签锥形线。.
零售尺寸表（例如绿夹克的RAW表）将Dogwalker映射至~70毫米 (~0.5克），经典 1¼ ~83 毫米 (~0.75 克），98特别~98毫米 (~1 克），经典/有机国王尺寸约110毫米 (~1.25 克），以及烟嘴较长的纤瘦型国王尺寸。Ace Rolling 是中国空烟筒的原始设备制造商——大约 美元 $0.04–$0.06 每个都有最小起订量。Ace不生产RAW。.
批发买家如何解读锥形尺寸表？
引导语：“大王”和“1¼”是营销名称，直到你锁定毫米数。.
总结：结合阅读总长度、滤嘴/烟嘴长度及标称存储/填充范围。Green Blazer 的图表将长度 + 滤嘴毫米数 + 近似克数配对——即使购买 OEM 而非 RAW 产品，也应在每个询价中使用该结构。.
| 你所听闻的名称 | 图表式提示（SERP） | 批发用途 |
|---|---|---|
| 迷你 / 遛狗者 | 约70毫米 / 约0.5克 | 取样器 / 微型 |
| 1 1/4 | ~83 毫米 / ~0.75 克 | 日常 / 多包装 |
| 98 特别款 | 约98毫米 / 约1克 | 中单 |
| 国王 | 约110毫米 / 约1.25克 | 全克旗舰 |
| 细长 / 纤薄王者 | ~110 毫米 + 较长烟嘴 | 细长型SKU |
关键要点： 将毫米 + 尖端毫米放在PO上——绝不仅仅是昵称。.
纸锥：https://ace-rolling.com/pre-rolled-cones/。.
批发计划何时应以1 1/4领先？
引言：1¼ 仍是许多柜台和个人填充的“默认”选择。.
摘要：图表展示经典 1¼ 接近 83 毫米 以及大约 0.75 克. 。批发买家在希望获得熟悉的中等填充量而不受大王ASP压力时，会将其用于多包装、家庭空筒和机器试验。.
| 适配信号 | 细长 1 1/4 |
|---|---|
| 多包装半克左右项目 | 强韧 |
| 初学者空锥 | 强韧 |
| 全克单支 | 弱 |
| 长尖细长外观 | 弱 |
关键要点： 除非销售已确立大王地位，否则将1¼作为你的控制SKU。.
批量：https://ace-rolling.com/bulk-pre-rolled-cones-wholesale-suppliers/。.
何时王者尺寸锥形在批发品类中胜出？
引言：当涉及较长会话或整克故事时，国王尺寸胜出。.
摘要：图表显示王者尺寸接近 110毫米 以及大约 1.25 克 storage. Wholesale kings need matching tubes/jars and often higher flower cost per unit—price the pack before you print tip art.
| 适配信号 | Lean king |
|---|---|
| Full-gram / long session | 强韧 |
| Shareable singles | 强韧 |
| Microdose / value minis | 弱 |
| Tight CR tube libraries | Check fit |
关键要点： King without tube fit data is a returns SKU.
OEM：https://ace-rolling.com/oem-odm-rolling-paper-manufacturer/。.
What About Slim / Lean Cones in Wholesale?
Lead-in: Slim is a silhouette and tip story, not just “smaller king.”
Summary: Lean-style rows on size charts keep ~110毫米 length but use longer filters (~40 mm) and lower stated fill (~1 克 对比约1.25 克 classic king). Wholesale slim SKUs need separate tip inventory and clear sell-sheet language so budtenders do not swap them with classic kings.
| Slim cue | Wholesale implication |
|---|---|
| Longer tip | Different mouth feel / pack |
| Narrower body | Different fill technique |
| Similar outer length to king | Easy PO mistakes |
关键要点： Give slim its own SKU code—never “king slim-ish.”
Machine fill: https://ace-rolling.com/what-are-the-best-pre-rolled-cones-for-machine-filling/.
How Should Minis Sit Beside 1 1/4 and King?
Lead-in: Minis (~70 mm / ~0.5 g) are a third lane, not a replacement.
Summary: Use minis for dogwalker-style value packs and trial sizes. Do not let minis cannibalize 1¼ without margin math.
| 品类 | Starter trio |
|---|---|
| Conservative | 1¼ + king |
| 完全 | Mini + 1¼ + king |
| Slim-led | Slim king + 1¼ |
关键要点： Three sizes max at launch unless data demands more.
批发定制购买：https://ace-rolling.com/how-to-buy-custom-pre-rolled-cones-wholesale/。.
How Do Ace OEM Prices Apply Across Sizes?
Lead-in: Size changes blanks and tips—cents move inside the band.
Summary: Ace wholesale cones typically plan about $0.04–$0.06美元 每个都有最低订购量（通常约2,000+). Confirm the point inside the band per mm/tip/print. Timeline commonly ~两个月 从概念到交付。.
| 成本层级 | 备注 |
|---|---|
| Ace OEM empty | ~$0.04–$0.06 + 最小起订量 |
| Size/tip change | Re-quote |
| 已着陆 | 运费+关税 |
| Flower COGS | Scales with fill grams |
关键要点： Re-quote when mm or tip length changes—do not assume one cents number for all sizes.
工厂：https://ace-rolling.com/about-factory/。.
How Do You Lock Size Mix with Ace Rolling?
Lead-in: Ace Rolling OEM-makes empty private-label cones—you pick the size mix.
Summary: Send target mm + tip mm + paper + print + pack for each size, sample, then MOQ.
| 步骤 | 行动 |
|---|---|
| 1 | Pick 1¼ / king / slim / mini mix |
| 2 | Write mm + tip mm per SKU |
| 3 | Sample + fill trial |
| 4 | 报价约0.04–0.06美元/纸锥 |
| 5 | 艺术品定稿后的大规模生产 |
关键要点： Wholesale size choice ends on a dated multi-SKU quote—not a RAW chart screenshot alone.
请从 https://ace-rolling.com/contact/ 开始。.
常见问题
King size vs 1 1/4 vs slim cones—which should wholesalers stock?
Stock 1¼ as the everyday control SKU, add king for full-gram/long-session tickets, and add slim only when you want a longer-tip silhouette with its own sell sheet. Use chart mm and tip length—not nicknames alone. Ace can OEM each size after samples at about $0.04–$0.06 per cone with MOQ.
How many grams do 1 1/4 and king cones hold?
Retail charts such as Green Blazer’s RAW guide place classic 1¼ near about 0.75 g and classic/organic king near about 1.25 g, with 98 mm near 1 g and ~70 mm minis near 0.5 g. Actual fill depends on grind and pack density. Confirm on your own weigh checks.
What makes slim cones different from king?
Slim/lean styles often keep a similar overall length to king but use a longer tip and a narrower body, with lower stated fill on some charts. Wholesale teams must SKU them separately so staff do not mix tips and tubes. Sample both before printing.
Should machine fillers start with king or 1 1/4?
Many lines validate mid sizes such as 1¼ / 84 mm-class cones first, then add 109–110 mm kings once trays and weights stabilize. Always check your filler OEM’s cone chart. Ace samples should run on the actual machine before artwork freeze.
How much do wholesale OEM cones cost by size?
Ace Rolling typically plans about USD $0.04–$0.06 per empty cone with MOQ across private-label programs, with exact cents depending on size, tip, print, and packaging. Re-quote when mm or tip length changes. Compare Incoterms on each SKU.
How do I order a size mix from Ace Rolling?
List each SKU’s length, tip length, paper, print, pack-out, quantity, and destination at https://ace-rolling.com/contact/. Request samples for every size before artwork freeze. Expect about two months concept-to-delivery planning, with mass often four to five weeks after approvals on confirmed quotes.
