特大號 vs 1 1/4 vs 細長錐批發？ 首先匹配毫米長度和尖頭長度以達到目標填充重量和包裝效果—然後在您的填充機上進行樣品測試—之後再印刷私人標籤錐形生產線。.
零售尺寸圖表（例如 Green Blazer 的 RAW 圖表）將 Dogwalker 映射為 ~70 毫米 (~0.5 克), 經典 1¼ ~83 毫米 (~0.75克)，98特殊尺寸約～98 毫米 (~1 克)，經典/有機國王尺寸約～110 毫米 (~1.25 克), 以及帶有較長尖端的細長/纖細特大號。Ace Rolling 是中國的空錐 OEM 廠商—大約 美元 $0.04–$0.06 每個都有最低訂購量。Ace 不生產 RAW。.
批發買家如何閱讀錐形尺寸圖表？
引導：「King」和「1¼」是行銷名稱，直到您鎖定毫米尺寸。.
總結：同時閱讀總長度、濾嘴/尖端長度和標示的儲存/填充帶。Green Blazer 的圖表配對長度 + 濾嘴毫米 + 近似克數—即使購買 OEM 而非 RAW，在每個詢價單上使用該結構。.
| 你聽到的名稱 | 圖表式提示（SERP） | 批發用途 |
|---|---|---|
| 迷你/遛狗尺寸 | ~70 毫米 / ~0.5 克 | 樣品 / 微型 |
| 1 1/4 | 約83毫米/約0.75克 | 日常 / 多包裝 |
| 98 特別版 | 約98毫米/約1克 | 中等單支 |
| 國王尺寸 | ~110 毫米 / ~1.25 克 | 全克旗艦 |
| 細長 / 纖細特大號 | 約110毫米+更長尖頭 | 細長輪廓SKU |
關鍵要點： 將毫米 + 尖端毫米放在採購訂單上—切勿僅使用暱稱。.
紙筒：https://ace-rolling.com/pre-rolled-cones/。.
批發計劃何時應以 1 1/4 為主打？
引導：1¼ 仍然是許多櫃檯和個人填充的「默認」選擇。.
摘要：圖表將經典 1¼ 置於附近 83 毫米 以及大約 0.75克. 。批發買家用於多包裝、家庭空盒和機器試用，當他們想要熟悉的中等填充量而無需承受國王尺寸的ASP壓力時。.
| 貼合信號 | 細長型 1 1/4 |
|---|---|
| 多包裝半克左右方案 | 強烈 |
| 初學者空錐 | 強烈 |
| 全克單支 | 弱 |
| 長尖細長外觀 | 弱 |
關鍵要點： 將1¼設為您的控制SKU，除非銷售量已經使國王尺寸成為冠軍。.
批發：https://ace-rolling.com/bulk-pre-rolled-cones-wholesale-suppliers/。.
When Do King Size Cones Win Wholesale Assortments?
Lead-in: King wins when the ticket is a longer session or full-gram story.
Summary: Chart kings near 110 毫米 以及大約 1.25 克 storage. Wholesale kings need matching tubes/jars and often higher flower cost per unit—price the pack before you print tip art.
| 貼合信號 | Lean king |
|---|---|
| Full-gram / long session | 強烈 |
| Shareable singles | 強烈 |
| Microdose / value minis | 弱 |
| Tight CR tube libraries | Check fit |
關鍵要點： King without tube fit data is a returns SKU.
OEM：https://ace-rolling.com/oem-odm-rolling-paper-manufacturer/。.
What About Slim / Lean Cones in Wholesale?
Lead-in: Slim is a silhouette and tip story, not just “smaller king.”
Summary: Lean-style rows on size charts keep ~110 毫米 length but use longer filters (~40 mm) and lower stated fill (~1 克 對比約1.25 克 classic king). Wholesale slim SKUs need separate tip inventory and clear sell-sheet language so budtenders do not swap them with classic kings.
| Slim cue | Wholesale implication |
|---|---|
| Longer tip | Different mouth feel / pack |
| Narrower body | Different fill technique |
| Similar outer length to king | Easy PO mistakes |
關鍵要點： Give slim its own SKU code—never “king slim-ish.”
Machine fill: https://ace-rolling.com/what-are-the-best-pre-rolled-cones-for-machine-filling/.
How Should Minis Sit Beside 1 1/4 and King?
Lead-in: Minis (~70 mm / ~0.5 g) are a third lane, not a replacement.
Summary: Use minis for dogwalker-style value packs and trial sizes. Do not let minis cannibalize 1¼ without margin math.
| 品類組合 | Starter trio |
|---|---|
| Conservative | 1¼ + king |
| 完整 | Mini + 1¼ + king |
| Slim-led | Slim king + 1¼ |
關鍵要點： Three sizes max at launch unless data demands more.
購買批發定制：https://ace-rolling.com/how-to-buy-custom-pre-rolled-cones-wholesale/。.
How Do Ace OEM Prices Apply Across Sizes?
Lead-in: Size changes blanks and tips—cents move inside the band.
Summary: Ace wholesale cones typically plan about $0.04–$0.06 每個都有最低訂購量（通常約為2,000+). Confirm the point inside the band per mm/tip/print. Timeline commonly ~兩個月 從概念到交付。.
| 成本層 | 註記 |
|---|---|
| Ace OEM empty | ~$0.04–$0.06 + 最低訂購量 |
| Size/tip change | Re-quote |
| 到岸 | 運費 + 關稅 |
| Flower COGS | Scales with fill grams |
關鍵要點： Re-quote when mm or tip length changes—do not assume one cents number for all sizes.
工廠：https://ace-rolling.com/about-factory/。.
How Do You Lock Size Mix with Ace Rolling?
Lead-in: Ace Rolling OEM-makes empty private-label cones—you pick the size mix.
Summary: Send target mm + tip mm + paper + print + pack for each size, sample, then MOQ.
| 步驟 | 行動 |
|---|---|
| 1 | Pick 1¼ / king / slim / mini mix |
| 2 | Write mm + tip mm per SKU |
| 3 | Sample + fill trial |
| 4 | 報價約為每錐形包裝 $0.04–$0.06 |
| 5 | 設計定稿後大量生產 |
關鍵要點： Wholesale size choice ends on a dated multi-SKU quote—not a RAW chart screenshot alone.
請從 https://ace-rolling.com/contact/ 開始。.
常見問題
King size vs 1 1/4 vs slim cones—which should wholesalers stock?
Stock 1¼ as the everyday control SKU, add king for full-gram/long-session tickets, and add slim only when you want a longer-tip silhouette with its own sell sheet. Use chart mm and tip length—not nicknames alone. Ace can OEM each size after samples at about $0.04–$0.06 per cone with MOQ.
How many grams do 1 1/4 and king cones hold?
Retail charts such as Green Blazer’s RAW guide place classic 1¼ near about 0.75 g and classic/organic king near about 1.25 g, with 98 mm near 1 g and ~70 mm minis near 0.5 g. Actual fill depends on grind and pack density. Confirm on your own weigh checks.
What makes slim cones different from king?
Slim/lean styles often keep a similar overall length to king but use a longer tip and a narrower body, with lower stated fill on some charts. Wholesale teams must SKU them separately so staff do not mix tips and tubes. Sample both before printing.
Should machine fillers start with king or 1 1/4?
Many lines validate mid sizes such as 1¼ / 84 mm-class cones first, then add 109–110 mm kings once trays and weights stabilize. Always check your filler OEM’s cone chart. Ace samples should run on the actual machine before artwork freeze.
How much do wholesale OEM cones cost by size?
Ace Rolling typically plans about USD $0.04–$0.06 per empty cone with MOQ across private-label programs, with exact cents depending on size, tip, print, and packaging. Re-quote when mm or tip length changes. Compare Incoterms on each SKU.
How do I order a size mix from Ace Rolling?
List each SKU’s length, tip length, paper, print, pack-out, quantity, and destination at https://ace-rolling.com/contact/. Request samples for every size before artwork freeze. Expect about two months concept-to-delivery planning, with mass often four to five weeks after approvals on confirmed quotes.
