你應該購買98毫米還是109毫米的預捲錐體？ 購買98毫米以獲得最廣泛的零售靈活性和較低的單位填充成本；當你的貨架定位是高級/加大尺寸，且你的管體、罐子和展示盒已針對較長錐體設計時，購買109毫米。.
SERP同行如The Cones Factory將尺寸選擇圍繞填充重量和貨架層級進行。廣東Ace Rolling是中國東莞的一家OEM/ODM廠商，專注於預捲錐體（約USD $0.04–$0.06，含最低訂購量），提供84mm、98mm、109mm及定制長度。本指南專門針對批發買家在兩種最常見的中高端尺寸（98mm和109mm）之間做出選擇進行比較。.
98毫米與109毫米錐體之間實際有何變化？
引言：十一毫米聽起來很小；它重塑了填充物、管體和價格層級。.
總結：98毫米錐體是大多數品牌首選庫存的「標準」批發尺寸。109毫米錐體是加大尺寸的升級——更長的紙張、更大的空腔，通常填充目標也更高。紙張、膠水和濾嘴技術完全相同；僅幾何形狀改變。.
| 規格 | 98毫米 | 109毫米 |
|---|---|---|
| 類別 | 標準 | 特大尺寸 |
| 典型填充 | 較低 | 更高 |
| 管長 | 較短 | 更長 |
| 貨架層級 | 價值/中階 | 優質 |
關鍵要點： 紙張和膠不變——只有長度、填充容量和貨架層級會改變。.
錐體尺寸：https://ace-rolling.com/pre-rolled-cones/。.
兩種尺寸的填充重量有何不同？
引言：填充重量驅動感知價值和單位材料成本。.
總結：買家通常將98mm錐體填充得比109mm錐體輕，因為其腔體較小。確切的目標重量是品牌決策，而非固定規格—在鎖定錐體幾何形狀前，請與您的機器填充合作夥伴或手工填充團隊確認您的填充目標。.
| 因素 | 98毫米 | 109毫米 |
|---|---|---|
| 腔體尺寸 | 較小 | 較大 |
| 典型填充目標 | 打火機 | 較重 |
| 機器填充調校 | 標準噴嘴 | 可能需要更長的行程 |
關鍵要點： 訂購錐體前確認您的實際填充目標——不要假設尺寸單獨決定重量。.
填充規劃：https://ace-rolling.com/pre-rolled-cones/。.
哪種管、罐和展示盒適合每個尺寸？
導入：錐體長度決定所有下游包裝尺寸。.
總結：98毫米錐體適用於較短的彈蓋管和較小的展示盒。109毫米錐體需要更長的管體和更高的展示盒裁切線。在訂購包裝前鎖定錐體尺寸，可避免在計劃中途重新裁切裁切線的昂貴成本。.
| 包裝 | 98毫米適用 | 109mm 適合 |
|---|---|---|
| 彈蓋管 | 標準長度 | 延伸長度 |
| 展示盒 | 較小的刀模線 | 較高的刀模線 |
| 裝運體積 | 較低 | 更高 |
關鍵要點： 包裝前鎖定錐體長度——裁切線是根據錐體裁切，而非相反。.
包裝途徑：https://ace-rolling.com/custom-rolling-papers/。.
錐體尺寸如何影響批發單位成本？
導入：長度、紙張使用和填充目標均會影響每個錐體的數量。.
總結：Ace 報價錐體在約 $0.04–$0.06 的批發區間內，含最低訂購量，但特定 SKU 的定位取決於紙張寬度、濾嘴類型、印刷和包裝——不僅僅是尺寸。109mm 錐體通常比 98mm 錐體使用更多紙張，這可能使成本在區間內微調。.
| 成本驅動因素 | 影響 |
|---|---|
| 紙張長度 | 109mm uses more paper |
| Filter tip type | Independent of length |
| Print / packaging | Independent of length |
| 最低訂購量 | Same ~2,000 planning baseline |
關鍵要點： Size is one input to the quote, not the whole story—confirm paper, tip, and pack-out together.
批發規劃：https://ace-rolling.com/quality-certifications/。.
What Shelf Story Does Each Size Tell Retail Buyers?
Lead-in: Size is a merchandising signal before it is a fill number.
Summary: 98mm reads as the everyday, accessible SKU. 109mm reads as king-size, premium, “more for special occasions.” Brands with a single-SKU launch often start at 98mm for shelf breadth, then add 109mm as a premium line extension once the core SKU sells through.
| 定位 | 98毫米 | 109毫米 |
|---|---|---|
| Shelf message | Everyday | Premium / occasion |
| Launch sequence | Often first SKU | Often line extension |
| Price point | 較低 | 更高 |
關鍵要點： Launch with 98mm for breadth, add 109mm as a premium extension once the core SKU proves out.
Launch planning: https://ace-rolling.com/house-of-brands/.
Can You Order Both Sizes in One Private-Label Program?
Lead-in: Most brands eventually want both; the question is sequencing.
Summary: Yes—Ace runs both sizes as OEM/private-label programs, each with its own MOQ, dieline, and sample retain. Ordering both in one combined RFQ can streamline artwork (shared brand cover, different cone length) but each size still needs its own approval and production slot.
| 方法 | Pro | Con |
|---|---|---|
| Single size first | Simpler, faster launch | Narrower shelf |
| Both sizes together | Broader shelf day one | Higher MOQ commitment |
| Sequential launch | Lower risk | Slower shelf breadth |
關鍵要點： Combine sizes in one RFQ for efficiency, but budget separate MOQ and approval time for each.
OEM方案：https://ace-rolling.com/oem-odm-rolling-paper-manufacturer/。.
How Do You Order 98mm or 109mm Cones From Ace Rolling?
Lead-in: One brief settles size, fill, paper, tip, and pack-out together.
Summary: Send Ace your target fill weight, paper route, filter tip type, packaging plan, quantity, destination, and timeline. Ace quotes inside the ~$0.04–$0.06 wholesale band with MOQ from about 2,000, and plans concept-to-delivery near two months with mass runs about four to five weeks after approvals.
| 步驟 | 行動 |
|---|---|
| 1 | Confirm target fill weight |
| 2 | Pick 98mm, 109mm, or both |
| 3 | Lock paper, tip, and pack-out |
| 4 | 核准樣品留存 |
| 5 | 量產 ~ 核准後約 4–5 週 |
關鍵要點： Fill weight and shelf story—not just the millimeter number—should drive your size decision.
開始：https://ace-rolling.com/contact/。.
常見問題
你應該購買98毫米還是109毫米的預捲錐體？
Buy 98mm for broad, everyday retail shelf positioning and a lower typical fill weight per unit. Buy 109mm when your brand story is premium or king-size and your tube, jar, and display carton are already sized for the longer cone. Many brands launch with 98mm first, then add 109mm as a premium line extension.
Does cone size change the wholesale price per cone?
Size is one input among several. Ace quotes cones inside a ~$0.04–$0.06 per-cone wholesale band with MOQ, and a 109mm cone typically uses more paper than a 98mm cone, which can shift the unit within that band. Filter tip type, print, and packaging also move the number—confirm the full spec before comparing quotes.
What fill weight should I target for a 98mm cone?
There is no single fixed fill weight for 98mm—your target depends on your product, market, and machine-fill setup. Buyers commonly plan a lighter fill for 98mm than for 109mm because the cavity is smaller. Confirm your exact target weight with your fill partner and validate it against sample retains before locking mass production.
Can Ace Rolling supply both 98mm and 109mm cones for one brand?
Yes. Ace Rolling produces 98mm, 109mm, 84mm, and custom cone lengths as OEM/private-label programs. Buyers can combine both sizes in one RFQ to streamline shared brand artwork, but each size still carries its own MOQ, sample approval, and production slot. Sequencing one size first is also common for brands managing launch budget.
Does 109mm require different packaging than 98mm?
Yes. A 109mm cone needs a longer tube and a taller display carton dieline than a 98mm cone. Locking cone length before finalizing packaging dielines avoids a costly re-cut mid-program. If you plan to launch both sizes, budget for two packaging dielines rather than trying to force one size into a shared package format.
What MOQ applies to 98mm or 109mm cone orders?
Ace generally plans cone MOQ from about 2,000 per SKU, depending on paper, filter tip, print, and packaging—size alone does not set MOQ. Concept-to-delivery typically runs near two months, with mass production about four to five weeks after all sample and artwork approvals are locked. Combining sizes in one RFQ does not reduce per-SKU MOQ.
Ready to Choose Your Cone Size?
Confirm your target fill weight and shelf story, then send Ace one brief covering size, paper, tip, and packaging.
- 錐形紙選項：https://ace-rolling.com/pre-rolled-cones/
- OEM方案：https://ace-rolling.com/oem-odm-rolling-paper-manufacturer/
- 引用：https://ace-rolling.com/contact/
