您应购买98毫米还是109毫米预卷锥形纸筒？ 购买98毫米锥形纸筒可获得最广泛的零售灵活性及更低的单位填充成本；若您的货架定位为高端/加大尺寸，且管身、罐装与展示盒已适配更长锥形，则选择109毫米。.
SERP同行如The Cones Factory将尺寸选择围绕填充重量和货架层级展开。广东Ace Rolling是位于中国东莞的预卷锥形纸筒OEM/ODM制造商，提供84mm、98mm、109mm及定制长度产品（单价约0.04–0.06美元，含起订量）。本指南专门为批发买家比较98mm和109mm这两种最常见的中高端尺寸。.
98毫米与109毫米锥形纸筒之间究竟有何不同？
引言：十一毫米看似微小；它重塑了填充物、管身与价格层级。.
总结：98mm 锥体是大多数品牌首选库存的“标准”批发尺寸。109mm 锥体是加大升级款——纸张更长、腔体更大，通常填充目标更高。纸张、胶水和滤嘴技术完全相同；仅几何形状变化。.
| 规格 | 98毫米 | 109毫米 |
|---|---|---|
| 类别 | 标准型 | 特大号 |
| 典型填充量 | 较低 | 更高 |
| 管身长度 | 较短 | 较长 |
| 货架层级 | 价值/中端 | 优质 |
关键要点： 纸张与胶水不变——仅长度、填充容量和货架层级变化。.
锥形尺寸：https://ace-rolling.com/pre-rolled-cones/。.
两种尺寸的填充重量有何不同？
引言：填充重量既影响感知价值，也影响单位材料成本。.
总结：买家通常将98毫米锥形填充得比109毫米更轻，因其内部空间较小。具体目标重量是品牌决策，而非固定规格——在确定锥形几何尺寸前，请与机械填充合作伙伴或手工填充团队确认您的填充目标。.
| 因素 | 98毫米 | 109毫米 |
|---|---|---|
| 腔体尺寸 | 较小 | 较大 |
| 典型填充目标 | 较轻 | 较重 |
| 机器填充调校 | 标准喷嘴 | 可能需要更长行程 |
关键要点： 订购锥体前确认实际填充目标——勿仅凭尺寸设定重量。.
填充规划：https://ace-rolling.com/pre-rolled-cones/。.
每种尺寸适配哪种管身、罐装与展示盒？
引言：锥形长度决定所有下游包装尺寸。.
总结：98mm 锥体适配较短的弹盖管和较小的展示盒。109mm 锥体需要更长的管和更高的展示盒裁切线。订购包装前锁定锥体尺寸可避免项目中途重新裁切的高成本。.
| 包装 | 98毫米适配 | 109毫米适配 |
|---|---|---|
| 弹出式管盖 | 标准长度 | 加长长度 |
| 展示纸箱 | 较小模切线 | 更高的模切线 |
| 运输立方 | 较低 | 更高 |
关键要点： 先确定锥形长度再设计包装——模切线依锥形切割，反之则不可行。.
包装方案：https://ace-rolling.com/custom-rolling-papers/。.
锥形尺寸如何影响批发单位成本？
引言：长度、纸张用量和填充目标均影响单锥体成本。.
总结：Ace 在 ~$0.04–$0.06 批发价格带内报价锥体（含起订量），但具体 SKU 的定位取决于纸张宽度、滤嘴类型、印刷和包装——而非仅尺寸。109mm 锥体通常比 98mm 锥体单位用纸更多，这可能在价格带内推高成本。.
| 成本驱动因素 | 影响 |
|---|---|
| Paper length | 109mm uses more paper |
| Filter tip type | Independent of length |
| Print / packaging | Independent of length |
| 最小起订量 | Same ~2,000 planning baseline |
关键要点： Size is one input to the quote, not the whole story—confirm paper, tip, and pack-out together.
批发规划：https://ace-rolling.com/quality-certifications/。.
What Shelf Story Does Each Size Tell Retail Buyers?
Lead-in: Size is a merchandising signal before it is a fill number.
Summary: 98mm reads as the everyday, accessible SKU. 109mm reads as king-size, premium, “more for special occasions.” Brands with a single-SKU launch often start at 98mm for shelf breadth, then add 109mm as a premium line extension once the core SKU sells through.
| 定位策略 | 98毫米 | 109毫米 |
|---|---|---|
| Shelf message | Everyday | Premium / occasion |
| Launch sequence | Often first SKU | Often line extension |
| Price point | 较低 | 更高 |
关键要点： Launch with 98mm for breadth, add 109mm as a premium extension once the core SKU proves out.
上市规划：https://ace-rolling.com/house-of-brands/。.
Can You Order Both Sizes in One Private-Label Program?
Lead-in: Most brands eventually want both; the question is sequencing.
Summary: Yes—Ace runs both sizes as OEM/private-label programs, each with its own MOQ, dieline, and sample retain. Ordering both in one combined RFQ can streamline artwork (shared brand cover, different cone length) but each size still needs its own approval and production slot.
| 方法 | Pro | Con |
|---|---|---|
| Single size first | Simpler, faster launch | Narrower shelf |
| Both sizes together | Broader shelf day one | Higher MOQ commitment |
| Sequential launch | Lower risk | Slower shelf breadth |
关键要点： Combine sizes in one RFQ for efficiency, but budget separate MOQ and approval time for each.
OEM项目：https://ace-rolling.com/oem-odm-rolling-paper-manufacturer/。.
How Do You Order 98mm or 109mm Cones From Ace Rolling?
Lead-in: One brief settles size, fill, paper, tip, and pack-out together.
Summary: Send Ace your target fill weight, paper route, filter tip type, packaging plan, quantity, destination, and timeline. Ace quotes inside the ~$0.04–$0.06 wholesale band with MOQ from about 2,000, and plans concept-to-delivery near two months with mass runs about four to five weeks after approvals.
| 步骤 | 行动 |
|---|---|
| 1 | Confirm target fill weight |
| 2 | Pick 98mm, 109mm, or both |
| 3 | Lock paper, tip, and pack-out |
| 4 | 批准样品保留 |
| 5 | 批准后约4–5周量产 |
关键要点： Fill weight and shelf story—not just the millimeter number—should drive your size decision.
开始：https://ace-rolling.com/contact/。.
常见问题
您应购买98毫米还是109毫米预卷锥形纸筒？
Buy 98mm for broad, everyday retail shelf positioning and a lower typical fill weight per unit. Buy 109mm when your brand story is premium or king-size and your tube, jar, and display carton are already sized for the longer cone. Many brands launch with 98mm first, then add 109mm as a premium line extension.
Does cone size change the wholesale price per cone?
Size is one input among several. Ace quotes cones inside a ~$0.04–$0.06 per-cone wholesale band with MOQ, and a 109mm cone typically uses more paper than a 98mm cone, which can shift the unit within that band. Filter tip type, print, and packaging also move the number—confirm the full spec before comparing quotes.
What fill weight should I target for a 98mm cone?
There is no single fixed fill weight for 98mm—your target depends on your product, market, and machine-fill setup. Buyers commonly plan a lighter fill for 98mm than for 109mm because the cavity is smaller. Confirm your exact target weight with your fill partner and validate it against sample retains before locking mass production.
Can Ace Rolling supply both 98mm and 109mm cones for one brand?
Yes. Ace Rolling produces 98mm, 109mm, 84mm, and custom cone lengths as OEM/private-label programs. Buyers can combine both sizes in one RFQ to streamline shared brand artwork, but each size still carries its own MOQ, sample approval, and production slot. Sequencing one size first is also common for brands managing launch budget.
Does 109mm require different packaging than 98mm?
Yes. A 109mm cone needs a longer tube and a taller display carton dieline than a 98mm cone. Locking cone length before finalizing packaging dielines avoids a costly re-cut mid-program. If you plan to launch both sizes, budget for two packaging dielines rather than trying to force one size into a shared package format.
What MOQ applies to 98mm or 109mm cone orders?
Ace generally plans cone MOQ from about 2,000 per SKU, depending on paper, filter tip, print, and packaging—size alone does not set MOQ. Concept-to-delivery typically runs near two months, with mass production about four to five weeks after all sample and artwork approvals are locked. Combining sizes in one RFQ does not reduce per-SKU MOQ.
Ready to Choose Your Cone Size?
Confirm your target fill weight and shelf story, then send Ace one brief covering size, paper, tip, and packaging.
- 锥形选项：https://ace-rolling.com/pre-rolled-cones/
- OEM项目：https://ace-rolling.com/oem-odm-rolling-paper-manufacturer/
- 报价：https://ace-rolling.com/contact/
