صناديق عرض مخصصة لما قبل اللف تحتاج إلى تصميم مقفل، وزن اللوح، مواصفات الطباعة والتشطيب، توافق رمز المخروط (84/98/109 مم)، مساحة ملصق التحذير، الحد الأدنى للطلب، وموافقة العينة قبل الإنتاج الضخم. تقدم Ace Rolling عروض أسعار مشتركة لكرتون التجزئة جنباً إلى جنب مع المخاريط المحضرة مسبقاً.
شركة قوانغدونغ آيس رولينج هي شركة تصنيع OEM/ODM وعلامة خاصة في دونغقوان، الصين، لمخاريط ما قبل اللف، وأوراق اللف المخصصة، وصناديق التجزئة المطابقة. الدلائل مثل أول نتيجة عضوية في محرك البحث لصناديق عرض السجائر المحضرة مسبقاً عرض صناديق العرض كفئة سوقية؛ تعامل مع الكميات والأسعار المنشورة كمراجع من الأقران، وليس كأرقام Ace.
ما الذي يجب أن يكون في موجز صندوق عرض السجائر المحضرة مسبقاً المخصص؟
يبدأ الطلب بموجز مكتوب يربط صندوق التجزئة برمز المخروط الداخلي. “صندوق عرض مخصص” بدون تحديد المخروط يؤدي عادةً إلى إعادة العمل، أو إدخالات غير متطابقة، أو كرتون لا يُغلق على الرف.
يجب أن يذكر الموجز حجم المخروط (84 مم، 98 مم، أو 109 مم)، وعدد العبوات في الصندوق، والتوجيه، وخيار البرطمان أو الأنبوب، وكيف سيتم وضع الصندوق على رف التجزئة. أرفق ورقة بيانات المخروط الحالية واللوحة المواجهة للرف التي تحمل العلامة التجارية.
| حقل الموجز | مثال على التعليمات | لماذا يحتاج المصنع إليها |
|---|---|---|
| رمز مخروط السيجارة | مخروط 98 مم، طبيعي غير مبيض، بحجم كبير | يقفل عرض وعمق خط القطع |
| عدد العبوات | 24 أنبوبًا لكل عرض، 4 صفوف من 6 | يحدد مساحة الرف والوزن |
| جرة أو أنبوب | ما قبل اللف في وعاء زجاجي بغطاء مقاوم للأطفال | يغير ارتفاع الكرتون والوسادة |
| موضع الرف | عرض على الطاولة، اللوحة الخلفية مرئية | يتحكم في لوحات الأعمال الفنية |
| نية العلامة التجارية | الشعار الرئيسي، رمز وحدة حفظ المخزون بالتجزئة، لوحة الدفعة | يحدد تخطيط الطباعة |
| المنطقة | صيدلية أمريكية، تبغ أوروبي، متجر تدخين أمريكا اللاتينية | يطوّق طبقة الامتثال |
بالنسبة لجانب المخروط في الطلب المشترك، راجع الوحدات الحالية على https://ace-rolling.com/pre-rolled-cones/ قبل إنهاء مساحة العرض. عادةً ما يختصر الملخص المكتوب القصير دورة التسعير بأكملها.
الخلاصة الرئيسية: حدد رمز مخروط السيجارة، عدد العبوات، وموضع الرف أولاً؛ يتبع تصميم صندوق العرض تلك الخيارات.
أي أوزان وأشكال الكرتون تناسب رفوف التجزئة للفائف ما قبل التدحرج؟
عادةً ما تقع صناديق العرض بالتجزئة لمخاريط ما قبل اللف بين صندوق كرتوني خفيف قابل للطي وصندوق هدايا صلب. يجب أن يحافظ الورق المقوى المختار على الشكل، ويحمي المخاريط أثناء النقل، ويدعم التشطيب المطبوع تحت إضاءة البيع بالتجزئة.
تشمل الطرق الشائعة SBS (كبريتات مبيضة صلبة) بحوالي 300–400 جم/م² لأسطح طباعة بيضاء نظيفة، وكرافت بورد بأوزان مماثلة لمظهر طبيعي، وكرتون مطلي لأعمال الطباعة عالية الألوان. يستخدم التمويج الموجي للشحنات الرئيسية، وليس لعرض الرف نفسه.
| مسار الورق المقوى | الاستخدام النموذجي | قوة الطباعة | مقايضة |
|---|---|---|---|
| SBS 300–350 جم/م² | عرض تجزئة مطبوع نظيف | دقة عالية لـ CMYK | تكلفة وحدة أعلى |
| SBS 350–400 جم/م² | عرض جرة أو أنبوب أثقل | نفس جودة الطباعة | يضيف وزن الشحن |
| كرافت 300-400 جم/م² | مظهر طبيعي غير مبيض | نطاق ألوان خافت | أقل بريقًا للعلامات التجارية المشرقة |
| لوحة فنية مطلية | Vivid full-color countertop | Excellent gloss print | Fingerprint marks under lights |
| E-flute laminate | Semi-rigid display with cushion | Good print with liner | More setup than pure SBS |
| Corrugated shipper | Outer master carton | Not shelf-facing | Not a retail display substrate |
Ace Rolling operates within an ISO 9001:2015 management framework and can discuss FSC-certified sourcing options for suitable projects. Confirm current material scope through https://ace-rolling.com/quality-certifications/ instead of putting eco claims on the printed carton.
الخلاصة الرئيسية: Match board weight to cone pack weight and shelf orientation; do not choose stock only from a color swatch.
How Do Dielines Match Cone Size and Pack Count?
The dieline is the flat structural drawing that defines cut, fold, glue, and window areas. For a pre-roll display, dieline width, depth, and inner divider heights all depend on the exact cone length and the number of tubes or jars the box will hold.
An 84mm cone tube is significantly shorter than a 109mm king-size cone tube, so a single “universal” dieline rarely works across SKUs. Buyers ordering multiple cone sizes usually need one dieline per SKU family, or a modular insert system inside a shared outer carton.
| Cone spec | Typical tube height | Display consideration | Dieline note |
|---|---|---|---|
| 84mm cone | Short tube | Lower shelf footprint | Compact inner rows |
| 98mm cone | Medium tube | Balanced counter unit | Common shared dieline |
| 109mm king-size cone | Tall tube | Higher visual presence | Extra height and hood |
| Glass jar SKU | Wider than tube | Heavier per unit | Adds cushion or divider |
| Multi-count pack | 3, 5, or 10 cones | More weight per box | Stronger board and glue |
| Master shipper | Multiple displays | Not shelf-facing | Separate corrugated dieline |
Send the cone datasheet alongside the artwork brief so the OEM prepress team can validate the dieline against the actual SKU. The full brief-to-sample flow is described at https://ace-rolling.com/oem-odm-rolling-paper-manufacturer/.
الخلاصة الرئيسية: Lock one dieline per cone SKU family; do not assume an 84mm tray will hold 109mm cones.
What Print, Foil, Spot UV, and Embossing Options Should You Compare?
Print and finish decisions belong in the brief, not in a late revision round. Retail display boxes for pre-roll cones usually combine a base print (CMYK plus any approved spot colors) with one or two selective finishes for shelf pop.
Common finish options include matte or gloss lamination, foil stamping in gold or silver, spot UV varnish for selective gloss, and embossing or debossing for tactile relief. These are options, not defaults, and each finish adds prepress files, tooling, or coating passes to the quote.
| Finish | Main effect | عندما يتناسب | Buyer question |
|---|---|---|---|
| Matte lamination | Soft, low-glare surface | Premium dispensary shelves | Does the matte scuff under handling? |
| Gloss lamination | Bright reflective surface | Convenience retail | How does gloss compete with lighting? |
| Foil stamp | Metallic logo or line art | High-visibility hero mark | Which foil color survives the print? |
| طباعة يوفيڤ لامعة محددة | Selective clear gloss | Logo or pattern accent | Which mask receives the coating? |
| Embossing | Physical relief on board | Tactile brand identity | Do dies distort the fold? |
| Debossing | Pressed-in mark | Restrained luxury feel | Is the reverse side acceptable? |
Spot UV and embossing are one finish family among several. Ace Rolling can quote booklet and retail carton work in parallel; browse current custom paper options at https://ace-rolling.com/custom-rolling-papers/ while your carton brief is being reviewed.
الخلاصة الرئيسية: Pick one focal finish for the shelf-facing panel and treat the rest as base print; stacking too many finishes raises risk.
What Compliance Labels and Warning Space Should Your Box Reserve?
A pre-roll retail display is a regulated pack in most jurisdictions. The dieline has to reserve dedicated space for warning statements, batch coding, THC or nicotine content (where applicable), country-of-origin, and any state or provincial mark.
The buyer is responsible for confirming the current wording, size, and placement rules with local counsel. The OEM can hold that reserved area on the artwork and check for print legibility, but it should not draft or approve the legal text on the buyer’s behalf.
| Labeling zone | Typical content | Design constraint | Owner |
|---|---|---|---|
| Primary panel | Brand logo, product name | Must remain clear at shelf distance | العلامة التجارية |
| Secondary panel | Cone size, pack count, strain | Fit the SKU grid | العلامة التجارية |
| Warning block | Local health or age warning | Minimum type size and contrast | Brand and counsel |
| Batch and lot | Traceability code | Legible under retail light | Brand and factory |
| Origin mark | Country of manufacture | Placement per import rule | Brand and counsel |
| Compliance mark | Regional stamp where required | Position fixed by law | Brand and counsel |
Ace Rolling supports private-label programs and can hold compliance areas on the dieline, but not certify legal wording. See how private-label programs run at https://ace-rolling.com/house-of-brands/ before the artwork is finalized.
الخلاصة الرئيسية: Draw the compliance panel on the dieline first; treat brand art as filling the remaining space, not the other way round.
What MOQ, Lead Time, and Sample Steps Should You Plan?
Retail display boxes are usually quoted alongside the cone order rather than as a standalone SKU. That co-order approach helps keep the display carton MOQ realistic, because both parts share the same production plan.
Ace OEM programs often start around 2,000 units, depending on cone size, material, printing, packaging, and quantity. Planning is commonly about two months from concept to delivery, with mass production often about four to five weeks after specs and proofs are approved. Sample rounds sit inside that window.
| Milestone | Typical status | إجراء المشتري | Factory action |
|---|---|---|---|
| Brief lock | Cone SKU, dieline, pack count | Send datasheet and artwork | Confirm feasibility |
| Quotation | Board, print, finish, MOQ | Review price and terms | Issue formal quote |
| Pre-production sample | Printed dieline with cone fit | Handle, weigh, sign off | Adjust before mass |
| Deposit and order | Contract, quantity, dates | Release deposit | Book production slot |
| Mass production | ~4–5 weeks after approvals | Track batches | Print, cut, assemble, QC |
| Ship and receive | Master shippers to destination | Receive and inspect | Document QC and shipment |
Factory-wholesale planning ranges are about USD $0.04–$0.06 per cone and about $0.07–$0.30 per custom booklet with MOQ; per-box display carton pricing is quote-dependent and should not be estimated from these paper figures. See the production setting at https://ace-rolling.com/about-factory/ when reviewing timelines with your team.
الخلاصة الرئيسية: Plan the display carton on the same timeline as the cone SKU; treat two months concept-to-delivery as a realistic default.
How Do You Order Custom Pre-Roll Display Boxes From Ace Rolling?
A useful RFQ describes the cone SKU and the display carton as one system. “Premium pre-roll display box” alone is too vague to price; the factory needs cone size, pack count, dieline, artwork, finish, quantity, and destination to issue a real quotation.
Send the cone SKU (84mm, 98mm, or 109mm and any custom size), pack count per display, jar or tube option, dieline or reference structure, base artwork with a separate finish mask if any, target quantity, destination country, and required documents. Note whether a physical printed sample is required before mass.
| RFQ line | Example wording | Why Ace needs it |
|---|---|---|
| رمز مخروط السيجارة | 98mm natural cone, 800 mg tobacco-free herbal fill | Locks dieline geometry |
| عدد العبوات | 24 tubes per display, 12 displays per shipper | Frames MOQ math |
| Board and finish | 350 gsm SBS, matte lamination, gold foil logo | Frames print quote |
| Compliance area | 30 percent back panel reserved for warning | Frames legal layout |
| الكمية | 5,000 displays with reorder in 90 days | Frames MOQ and price |
| Documents | ISO 9001:2015 reference, FSC option if available | Frames sourcing route |
| عينة | Printed pre-production sample required | Adds one approval gate |
Ace Rolling does not make RAW, Rizla, or OCB branded packaging, and does not stamp medical or eco claims on a carton without the matching certification. To move from brief to quotation, contact the OEM team at https://ace-rolling.com/contact/ with the fields above filled in.
الخلاصة الرئيسية: Send one RFQ that covers cone SKU, display carton, and shipper at the same time; expect a co-order quotation, not two disconnected prices.
الأسئلة الشائعة
What is a custom pre-roll display box?
A custom pre-roll display box is a printed retail carton designed to hold a specific pre-rolled cone SKU, usually 84mm, 98mm, or 109mm, in tube or jar format. It carries brand artwork, cone count, and compliance labels, and sits on a dispensary shelf, tobacco counter, or smoke shop display for direct retail sale.
What is a common MOQ for custom pre-roll display cartons?
Ace Rolling OEM programs often start around 2,000 units, depending on cone size, board weight, print work, finishes, and total quantity. Peer directories may advertise different figures. Treat any market number as reference only, and request a project-specific minimum order quantity through a full brief so the quotation matches your actual retail plan.
How long does a custom display box order take?
Concept-to-delivery is commonly around two months for a coordinated cone plus display carton project. Mass production usually runs about four to five weeks after all specifications, artwork, dielines, and physical samples are approved. Prepress reviews, printed sample rounds, and shipping to your destination country sit inside or after that mass window.
Can Ace Rolling co-order cones and display boxes together?
Yes. Ace Rolling is a Dongguan, China OEM/ODM and private-label maker of pre-rolled cones, custom rolling papers, and matching retail cartons. A co-order lets one production plan cover both the cone SKU and the shelf-facing display, which usually simplifies MOQ math, sample scheduling, master shipper packing, and export documentation for a single destination.
What files should I send for a display box quote?
Send the cone datasheet, the display dieline or a reference structure, base print artwork in vector format, any separate finish masks, target quantity, destination country, and required documents. Also note whether a printed pre-production sample is required. This lets Ace Rolling confirm cone fit, board weight, print feasibility, MOQ, timing, and quote-dependent pricing accurately.
Are Ace Rolling display boxes RAW, Rizla, or OCB packaging?
No. Ace Rolling does not manufacture RAW, Rizla, or OCB branded packaging. Ace produces custom and private-label retail cartons for pre-rolled cones and rolling papers under buyer brands, with ISO 9001:2015 framework and FSC-certified sourcing available as an option on suitable programs rather than as an automatic feature of every SKU.
