Индивидуальные дисплейные коробки для прероллов требуется утверждённый шаблон раскроя, плотность картона, спецификация печати и отделки, совместимость с SKU конусов (84/98/109 мм), область для предупредительной этикетки, MOQ и подписание образца перед серийным производством. Ace Rolling совместно предлагает розничные коробки вместе с предварительно скрученными конусами.
Guangdong Ace Rolling — это OEM/ODM производитель и производитель под частной маркой из Дунгуаня, Китай, выпускающий предварительно скрученные конусы, индивидуальные бумаги для самокруток и соответствующие розничные коробки. Справочники, такие как первый органический результат SERP по дисплейным коробкам для прероллов отображать дисплейные коробки как рыночную категорию; рассматривать их опубликованные количества и цены как ориентиры конкурентов, а не данные Ace.
Что должно быть в брифе на индивидуальную коробку для предварительно свернутых изделий?
Заказ начинается с письменного задания, связывающего розничную коробку с артикулом конуса внутри. “Пользовательская дисплейная коробка” без спецификации конуса обычно приводит к доработкам, несоответствующим вкладышам или коробке, которая не будет закрываться на полке.
В задании следует указать размер конуса (84 мм, 98 мм или 109 мм), количество упаковок в коробке, ориентацию, вариант банки или тубы, и как коробка будет стоять на розничной полке. Приложите текущий даташит конуса и полочную панель с брендингом.
| Поле брифа | Пример инструкции | Зачем это нужно фабрике |
|---|---|---|
| Артикул конуса | Конус 98 мм, натуральный небелёный, королевского размера | Фиксирует ширину и глубину развертки |
| Количество упаковок | 24 тубы на дисплей, 4 ряда по 6 | Задаёт площадь на полке и вес |
| Банка или туба | Предварительно свернутый в стеклянной банке с крышкой, защищающей от детей | Изменяет высоту коробки и амортизацию |
| Позиция на полке | Прилавковая витрина, видимая задняя панель | Управляет панелями дизайна |
| Намерение брендинга | Главный логотип, розничный артикул, панель партии | Определяет макет печати |
| Регион | Диспансеры США, табачные магазины ЕС, курительные магазины LATAM | Обрамляет слой соответствия |
Для стороны конусов в совместном заказе просмотрите текущие артикулы на https://ace-rolling.com/pre-rolled-cones/ перед финализацией размера дисплея. Краткое письменное задание обычно сокращает весь цикл котировок.
Ключевой вывод: Сначала укажите артикул конуса, количество в упаковке и позицию на полке; развертка дисплейной коробки следует из этих выборов.
Какие плотности картона и отделки подходят для розничных полок прероллов?
Розничные дисплейные коробки для прероллов обычно находятся между легкой складной картонной упаковкой и жесткой подарочной коробкой. Выбранный картон должен сохранять форму, защищать конусы при транспортировке и поддерживать печатное покрытие при розничном освещении.
Распространенные варианты включают SBS (сульфатную целлюлозу) примерно 300–400 г/м² для чистых белых печатных поверхностей, крафт-картон аналогичного веса для естественного вида и мелованный картон для печати с высокой цветопередачей. Гофрированный слой используется для транспортной тары, а не для самой полочной дисплейной упаковки.
| Тип картона | Типичное использование | Интенсивность печати | Компромисс |
|---|---|---|---|
| SBS 300–350 г/м² | Чистая печатная розничная витрина | Высокая точность CMYK | Более высокая себестоимость единицы |
| SBS 350–400 г/м² | Более тяжелый дисплей для банок или туб | Такое же качество печати | Добавляет вес доставки |
| Крафт 300–400 г/м² | Естественный, неотбеленный вид | Muted color range | Less pop for bright brands |
| Coated art board | Vivid full-color countertop | Excellent gloss print | Fingerprint marks under lights |
| E-flute laminate | Semi-rigid display with cushion | Good print with liner | More setup than pure SBS |
| Corrugated shipper | Outer master carton | Not shelf-facing | Not a retail display substrate |
Ace Rolling operates within an ISO 9001:2015 management framework and can discuss FSC-certified sourcing options for suitable projects. Confirm current material scope through https://ace-rolling.com/quality-certifications/ instead of putting eco claims on the printed carton.
Ключевой вывод: Match board weight to cone pack weight and shelf orientation; do not choose stock only from a color swatch.
How Do Dielines Match Cone Size and Pack Count?
The dieline is the flat structural drawing that defines cut, fold, glue, and window areas. For a pre-roll display, dieline width, depth, and inner divider heights all depend on the exact cone length and the number of tubes or jars the box will hold.
An 84mm cone tube is significantly shorter than a 109mm king-size cone tube, so a single “universal” dieline rarely works across SKUs. Buyers ordering multiple cone sizes usually need one dieline per SKU family, or a modular insert system inside a shared outer carton.
| Cone spec | Typical tube height | Display consideration | Dieline note |
|---|---|---|---|
| 84mm cone | Short tube | Lower shelf footprint | Compact inner rows |
| 98mm cone | Medium tube | Balanced counter unit | Common shared dieline |
| 109mm king-size cone | Tall tube | Higher visual presence | Extra height and hood |
| Glass jar SKU | Wider than tube | Heavier per unit | Adds cushion or divider |
| Multi-count pack | 3, 5, or 10 cones | More weight per box | Stronger board and glue |
| Master shipper | Multiple displays | Not shelf-facing | Separate corrugated dieline |
Send the cone datasheet alongside the artwork brief so the OEM prepress team can validate the dieline against the actual SKU. The full brief-to-sample flow is described at https://ace-rolling.com/oem-odm-rolling-paper-manufacturer/.
Ключевой вывод: Lock one dieline per cone SKU family; do not assume an 84mm tray will hold 109mm cones.
What Print, Foil, Spot UV, and Embossing Options Should You Compare?
Print and finish decisions belong in the brief, not in a late revision round. Retail display boxes for pre-roll cones usually combine a base print (CMYK plus any approved spot colors) with one or two selective finishes for shelf pop.
Common finish options include matte or gloss lamination, foil stamping in gold or silver, spot UV varnish for selective gloss, and embossing or debossing for tactile relief. These are options, not defaults, and each finish adds prepress files, tooling, or coating passes to the quote.
| Finish | Main effect | Когда это уместно | Вопрос покупателя |
|---|---|---|---|
| Matte lamination | Soft, low-glare surface | Premium dispensary shelves | Does the matte scuff under handling? |
| Gloss lamination | Bright reflective surface | Convenience retail | How does gloss compete with lighting? |
| Foil stamp | Metallic logo or line art | High-visibility hero mark | Which foil color survives the print? |
| Выборочное УФ-лакирование | Selective clear gloss | Logo or pattern accent | Which mask receives the coating? |
| Embossing | Physical relief on board | Tactile brand identity | Do dies distort the fold? |
| Debossing | Pressed-in mark | Restrained luxury feel | Is the reverse side acceptable? |
Spot UV and embossing are one finish family among several. Ace Rolling can quote booklet and retail carton work in parallel; browse current custom paper options at https://ace-rolling.com/custom-rolling-papers/ while your carton brief is being reviewed.
Ключевой вывод: Pick one focal finish for the shelf-facing panel and treat the rest as base print; stacking too many finishes raises risk.
What Compliance Labels and Warning Space Should Your Box Reserve?
A pre-roll retail display is a regulated pack in most jurisdictions. The dieline has to reserve dedicated space for warning statements, batch coding, THC or nicotine content (where applicable), country-of-origin, and any state or provincial mark.
The buyer is responsible for confirming the current wording, size, and placement rules with local counsel. The OEM can hold that reserved area on the artwork and check for print legibility, but it should not draft or approve the legal text on the buyer’s behalf.
| Labeling zone | Typical content | Design constraint | Owner |
|---|---|---|---|
| Primary panel | Brand logo, product name | Must remain clear at shelf distance | Бренд |
| Secondary panel | Cone size, pack count, strain | Fit the SKU grid | Бренд |
| Warning block | Local health or age warning | Minimum type size and contrast | Brand and counsel |
| Batch and lot | Traceability code | Legible under retail light | Brand and factory |
| Origin mark | Country of manufacture | Placement per import rule | Brand and counsel |
| Compliance mark | Regional stamp where required | Position fixed by law | Brand and counsel |
Ace Rolling supports private-label programs and can hold compliance areas on the dieline, but not certify legal wording. See how private-label programs run at https://ace-rolling.com/house-of-brands/ before the artwork is finalized.
Ключевой вывод: Draw the compliance panel on the dieline first; treat brand art as filling the remaining space, not the other way round.
What MOQ, Lead Time, and Sample Steps Should You Plan?
Retail display boxes are usually quoted alongside the cone order rather than as a standalone SKU. That co-order approach helps keep the display carton MOQ realistic, because both parts share the same production plan.
Ace OEM programs often start around 2,000 units, depending on cone size, material, printing, packaging, and quantity. Planning is commonly about two months from concept to delivery, with mass production often about four to five weeks after specs and proofs are approved. Sample rounds sit inside that window.
| Milestone | Typical status | Действие покупателя | Factory action |
|---|---|---|---|
| Brief lock | Cone SKU, dieline, pack count | Send datasheet and artwork | Confirm feasibility |
| Цитата | Board, print, finish, MOQ | Review price and terms | Issue formal quote |
| Предсерийный образец | Printed dieline with cone fit | Handle, weigh, sign off | Adjust before mass |
| Deposit and order | Contract, quantity, dates | Release deposit | Book production slot |
| Массовое производство | ~4–5 weeks after approvals | Track batches | Print, cut, assemble, QC |
| Ship and receive | Master shippers to destination | Receive and inspect | Document QC and shipment |
Factory-wholesale planning ranges are about USD $0.04–$0.06 per cone and about $0.07–$0.30 per custom booklet with MOQ; per-box display carton pricing is quote-dependent and should not be estimated from these paper figures. See the production setting at https://ace-rolling.com/about-factory/ when reviewing timelines with your team.
Ключевой вывод: Plan the display carton on the same timeline as the cone SKU; treat two months concept-to-delivery as a realistic default.
How Do You Order Custom Pre-Roll Display Boxes From Ace Rolling?
A useful RFQ describes the cone SKU and the display carton as one system. “Premium pre-roll display box” alone is too vague to price; the factory needs cone size, pack count, dieline, artwork, finish, quantity, and destination to issue a real quotation.
Send the cone SKU (84mm, 98mm, or 109mm and any custom size), pack count per display, jar or tube option, dieline or reference structure, base artwork with a separate finish mask if any, target quantity, destination country, and required documents. Note whether a physical printed sample is required before mass.
| RFQ line | Example wording | Why Ace needs it |
|---|---|---|
| Артикул конуса | 98mm natural cone, 800 mg tobacco-free herbal fill | Locks dieline geometry |
| Количество упаковок | 24 tubes per display, 12 displays per shipper | Frames MOQ math |
| Board and finish | 350 gsm SBS, matte lamination, gold foil logo | Frames print quote |
| Compliance area | 30 percent back panel reserved for warning | Frames legal layout |
| Quantity | 5,000 displays with reorder in 90 days | Frames MOQ and price |
| Documents | ISO 9001:2015 reference, FSC option if available | Frames sourcing route |
| Образец | Printed pre-production sample required | Adds one approval gate |
Ace Rolling does not make RAW, Rizla, or OCB branded packaging, and does not stamp medical or eco claims on a carton without the matching certification. To move from brief to quotation, contact the OEM team at https://ace-rolling.com/contact/ with the fields above filled in.
Ключевой вывод: Send one RFQ that covers cone SKU, display carton, and shipper at the same time; expect a co-order quotation, not two disconnected prices.
Часто задаваемые вопросы
What is a custom pre-roll display box?
A custom pre-roll display box is a printed retail carton designed to hold a specific pre-rolled cone SKU, usually 84mm, 98mm, or 109mm, in tube or jar format. It carries brand artwork, cone count, and compliance labels, and sits on a dispensary shelf, tobacco counter, or smoke shop display for direct retail sale.
What is a common MOQ for custom pre-roll display cartons?
Ace Rolling OEM programs often start around 2,000 units, depending on cone size, board weight, print work, finishes, and total quantity. Peer directories may advertise different figures. Treat any market number as reference only, and request a project-specific minimum order quantity through a full brief so the quotation matches your actual retail plan.
How long does a custom display box order take?
Concept-to-delivery is commonly around two months for a coordinated cone plus display carton project. Mass production usually runs about four to five weeks after all specifications, artwork, dielines, and physical samples are approved. Prepress reviews, printed sample rounds, and shipping to your destination country sit inside or after that mass window.
Can Ace Rolling co-order cones and display boxes together?
Yes. Ace Rolling is a Dongguan, China OEM/ODM and private-label maker of pre-rolled cones, custom rolling papers, and matching retail cartons. A co-order lets one production plan cover both the cone SKU and the shelf-facing display, which usually simplifies MOQ math, sample scheduling, master shipper packing, and export documentation for a single destination.
What files should I send for a display box quote?
Send the cone datasheet, the display dieline or a reference structure, base print artwork in vector format, any separate finish masks, target quantity, destination country, and required documents. Also note whether a printed pre-production sample is required. This lets Ace Rolling confirm cone fit, board weight, print feasibility, MOQ, timing, and quote-dependent pricing accurately.
Are Ace Rolling display boxes RAW, Rizla, or OCB packaging?
No. Ace Rolling does not manufacture RAW, Rizla, or OCB branded packaging. Ace produces custom and private-label retail cartons for pre-rolled cones and rolling papers under buyer brands, with ISO 9001:2015 framework and FSC-certified sourcing available as an option on suitable programs rather than as an automatic feature of every SKU.
