Boîtes de présentation personnalisées pour pré-roulés nécessitent un dieline verrouillé, le grammage du carton, les spécifications d'impression et de finition, la compatibilité des références de cônes (84/98/109mm), la zone d'étiquette d'avertissement, le MOQ et une validation d'échantillon avant la production de masse. Ace Rolling co-propose des devis pour les cartons de vente au détail avec les cônes pré-roulés.
Guangdong Ace Rolling est un fabricant OEM/ODM et de marque privée basé à Dongguan, en Chine, spécialisé dans les cônes pré-roulés, les papiers à rouler personnalisés et les cartons de vente au détail assortis. Les annuaires tels que le premier résultat organique SERP sur les boîtes de présentoir pré-roulées présenter les cartons de présentoir comme une catégorie de marché ; traiter leurs quantités et prix publiés comme des références concurrentielles, pas des chiffres Ace.
Que doit contenir un brief pour une boîte de pré-roulés personnalisée ?
La commande commence par un cahier des charges écrit qui lie la boîte de vente au détail à la référence du cône à l'intérieur. Un “ étui de présentation personnalisé ” sans spécification du cône entraîne généralement des retouches, des inserts inadaptés ou un carton qui ne se ferme pas correctement en rayon.
Le cahier des charges doit préciser la taille du cône (84 mm, 98 mm ou 109 mm), le nombre d'unités par boîte, l'orientation, l'option pot ou tube, et comment la boîte sera positionnée sur l'étagère de vente. Joindre la fiche technique actuelle du cône et le panneau visible en rayon portant l'identité de marque.
| Champ du brief | Exemple d'instruction | Pourquoi l'usine en a besoin |
|---|---|---|
| Référence du cône | Cône 98mm, naturel non blanchi, king-size | Verrouille la largeur et la profondeur du dieline |
| Nombre d'unités par paquet | 24 tubes par présentoir, 4 rangées de 6 | Définit l'empreinte et le poids en rayon |
| Pot ou tube | Pré-roulé en pot en verre avec couvercle sécurisé pour enfants | Modifie la hauteur du carton et le rembourrage |
| Position en rayon | Présentoir de comptoir, panneau arrière visible | Contrôle les panneaux graphiques |
| Intention de marque | Logo principal, code SKU détaillant, panneau de lot | Définit la mise en page d'impression |
| Région | Dispensaire US, tabac UE, boutique de fumeurs LATAM | Couche de conformité des cadres |
Pour le côté cône de la co-commande, vérifiez les références actuelles sur https://ace-rolling.com/pre-rolled-cones/ avant de finaliser l'empreinte du présentoir. Un bref écrit raccourcit généralement tout le cycle de devis.
Point clé : Spécifiez d'abord la référence du cône, le nombre d'unités par paquet et la position en rayon ; le dieline de la boîte de présentoir découle de ces choix.
Quels grammages et finitions de carton conviennent aux étagères de vente de pré-roulés ?
Les boîtes de présentation pour cônes pré-roulés se situent généralement entre un carton pliant léger et une boîte cadeau rigide. Le carton choisi doit garder sa forme, protéger les cônes pendant le transport et supporter la finition imprimée sous l'éclairage du point de vente.
Les types courants incluent le SBS (sulfate blanchi solide) à environ 300–400 g/m² pour des surfaces d'impression blanches propres, le carton kraft à des grammages similaires pour un aspect naturel, et le carton couché pour les impressions haute couleur. Le cannelé est utilisé pour les caisses maîtresses, pas pour le présentoir en rayon.
| Type de carton | Utilisation typique | Résistance à l'impression | Compromis |
|---|---|---|---|
| SBS 300–350 g/m² | Présentoir de vente imprimé propre | Haute fidélité CMJN | Coût unitaire plus élevé |
| SBS 350–400 g/m² | Présentoir plus lourd pour pot ou tube | Même qualité d'impression | Ajoute du poids d'expédition |
| Kraft 300–400 g/m² | Aspect naturel, non blanchi | Gamme de couleurs atténuées | Less pop for bright brands |
| Coated art board | Vivid full-color countertop | Excellent gloss print | Fingerprint marks under lights |
| E-flute laminate | Semi-rigid display with cushion | Good print with liner | More setup than pure SBS |
| Corrugated shipper | Outer master carton | Not shelf-facing | Not a retail display substrate |
Ace Rolling operates within an ISO 9001:2015 management framework and can discuss FSC-certified sourcing options for suitable projects. Confirm current material scope through https://ace-rolling.com/quality-certifications/ instead of putting eco claims on the printed carton.
Point clé : Match board weight to cone pack weight and shelf orientation; do not choose stock only from a color swatch.
How Do Dielines Match Cone Size and Pack Count?
The dieline is the flat structural drawing that defines cut, fold, glue, and window areas. For a pre-roll display, dieline width, depth, and inner divider heights all depend on the exact cone length and the number of tubes or jars the box will hold.
An 84mm cone tube is significantly shorter than a 109mm king-size cone tube, so a single “universal” dieline rarely works across SKUs. Buyers ordering multiple cone sizes usually need one dieline per SKU family, or a modular insert system inside a shared outer carton.
| Cone spec | Typical tube height | Display consideration | Dieline note |
|---|---|---|---|
| Cône 84mm | Short tube | Lower shelf footprint | Compact inner rows |
| 98mm cone | Medium tube | Balanced counter unit | Common shared dieline |
| 109mm king-size cone | Tall tube | Higher visual presence | Extra height and hood |
| Glass jar SKU | Wider than tube | Heavier per unit | Adds cushion or divider |
| Multi-count pack | 3, 5, or 10 cones | More weight per box | Stronger board and glue |
| Master shipper | Multiple displays | Not shelf-facing | Separate corrugated dieline |
Send the cone datasheet alongside the artwork brief so the OEM prepress team can validate the dieline against the actual SKU. The full brief-to-sample flow is described at https://ace-rolling.com/oem-odm-rolling-paper-manufacturer/.
Point clé : Lock one dieline per cone SKU family; do not assume an 84mm tray will hold 109mm cones.
What Print, Foil, Spot UV, and Embossing Options Should You Compare?
Print and finish decisions belong in the brief, not in a late revision round. Retail display boxes for pre-roll cones usually combine a base print (CMYK plus any approved spot colors) with one or two selective finishes for shelf pop.
Common finish options include matte or gloss lamination, foil stamping in gold or silver, spot UV varnish for selective gloss, and embossing or debossing for tactile relief. These are options, not defaults, and each finish adds prepress files, tooling, or coating passes to the quote.
| Finition | Main effect | Quand cela convient | Question de l'acheteur |
|---|---|---|---|
| Matte lamination | Soft, low-glare surface | Premium dispensary shelves | Does the matte scuff under handling? |
| Gloss lamination | Bright reflective surface | Convenience retail | How does gloss compete with lighting? |
| Foil stamp | Metallic logo or line art | High-visibility hero mark | Which foil color survives the print? |
| Spot UV | Selective clear gloss | Logo or pattern accent | Which mask receives the coating? |
| Embossing | Physical relief on board | Tactile brand identity | Do dies distort the fold? |
| Debossing | Pressed-in mark | Restrained luxury feel | Is the reverse side acceptable? |
Spot UV and embossing are one finish family among several. Ace Rolling can quote booklet and retail carton work in parallel; browse current custom paper options at https://ace-rolling.com/custom-rolling-papers/ while your carton brief is being reviewed.
Point clé : Pick one focal finish for the shelf-facing panel and treat the rest as base print; stacking too many finishes raises risk.
What Compliance Labels and Warning Space Should Your Box Reserve?
A pre-roll retail display is a regulated pack in most jurisdictions. The dieline has to reserve dedicated space for warning statements, batch coding, THC or nicotine content (where applicable), country-of-origin, and any state or provincial mark.
The buyer is responsible for confirming the current wording, size, and placement rules with local counsel. The OEM can hold that reserved area on the artwork and check for print legibility, but it should not draft or approve the legal text on the buyer’s behalf.
| Labeling zone | Typical content | Design constraint | Propriétaire |
|---|---|---|---|
| Primary panel | Brand logo, product name | Must remain clear at shelf distance | Marque |
| Secondary panel | Cone size, pack count, strain | Fit the SKU grid | Marque |
| Warning block | Local health or age warning | Minimum type size and contrast | Brand and counsel |
| Batch and lot | Traceability code | Legible under retail light | Brand and factory |
| Origin mark | Country of manufacture | Placement per import rule | Brand and counsel |
| Compliance mark | Regional stamp where required | Position fixed by law | Brand and counsel |
Ace Rolling supports private-label programs and can hold compliance areas on the dieline, but not certify legal wording. See how private-label programs run at https://ace-rolling.com/house-of-brands/ before the artwork is finalized.
Point clé : Draw the compliance panel on the dieline first; treat brand art as filling the remaining space, not the other way round.
What MOQ, Lead Time, and Sample Steps Should You Plan?
Retail display boxes are usually quoted alongside the cone order rather than as a standalone SKU. That co-order approach helps keep the display carton MOQ realistic, because both parts share the same production plan.
Ace OEM programs often start around 2,000 units, depending on cone size, material, printing, packaging, and quantity. Planning is commonly about two months from concept to delivery, with mass production often about four to five weeks after specs and proofs are approved. Sample rounds sit inside that window.
| Milestone | Typical status | Action de l'acheteur | Factory action |
|---|---|---|---|
| Brief lock | Cone SKU, dieline, pack count | Send datasheet and artwork | Confirm feasibility |
| Devis | Board, print, finish, MOQ | Review price and terms | Issue formal quote |
| Pre-production sample | Printed dieline with cone fit | Handle, weigh, sign off | Adjust before mass |
| Deposit and order | Contract, quantity, dates | Release deposit | Book production slot |
| Mass production | ~4–5 weeks after approvals | Track batches | Print, cut, assemble, QC |
| Ship and receive | Master shippers to destination | Receive and inspect | Document QC and shipment |
Factory-wholesale planning ranges are about USD $0.04–$0.06 per cone and about $0.07–$0.30 per custom booklet with MOQ; per-box display carton pricing is quote-dependent and should not be estimated from these paper figures. See the production setting at https://ace-rolling.com/about-factory/ when reviewing timelines with your team.
Point clé : Plan the display carton on the same timeline as the cone SKU; treat two months concept-to-delivery as a realistic default.
How Do You Order Custom Pre-Roll Display Boxes From Ace Rolling?
A useful RFQ describes the cone SKU and the display carton as one system. “Premium pre-roll display box” alone is too vague to price; the factory needs cone size, pack count, dieline, artwork, finish, quantity, and destination to issue a real quotation.
Send the cone SKU (84mm, 98mm, or 109mm and any custom size), pack count per display, jar or tube option, dieline or reference structure, base artwork with a separate finish mask if any, target quantity, destination country, and required documents. Note whether a physical printed sample is required before mass.
| RFQ line | Example wording | Why Ace needs it |
|---|---|---|
| Référence du cône | 98mm natural cone, 800 mg tobacco-free herbal fill | Locks dieline geometry |
| Nombre d'unités par paquet | 24 tubes per display, 12 displays per shipper | Frames MOQ math |
| Board and finish | 350 gsm SBS, matte lamination, gold foil logo | Frames print quote |
| Compliance area | 30 percent back panel reserved for warning | Frames legal layout |
| Quantity | 5,000 displays with reorder in 90 days | Frames MOQ and price |
| Documents | ISO 9001:2015 reference, FSC option if available | Frames sourcing route |
| Échantillon | Printed pre-production sample required | Adds one approval gate |
Ace Rolling does not make RAW, Rizla, or OCB branded packaging, and does not stamp medical or eco claims on a carton without the matching certification. To move from brief to quotation, contact the OEM team at https://ace-rolling.com/contact/ with the fields above filled in.
Point clé : Send one RFQ that covers cone SKU, display carton, and shipper at the same time; expect a co-order quotation, not two disconnected prices.
FAQ
What is a custom pre-roll display box?
A custom pre-roll display box is a printed retail carton designed to hold a specific pre-rolled cone SKU, usually 84mm, 98mm, or 109mm, in tube or jar format. It carries brand artwork, cone count, and compliance labels, and sits on a dispensary shelf, tobacco counter, or smoke shop display for direct retail sale.
What is a common MOQ for custom pre-roll display cartons?
Ace Rolling OEM programs often start around 2,000 units, depending on cone size, board weight, print work, finishes, and total quantity. Peer directories may advertise different figures. Treat any market number as reference only, and request a project-specific minimum order quantity through a full brief so the quotation matches your actual retail plan.
How long does a custom display box order take?
Concept-to-delivery is commonly around two months for a coordinated cone plus display carton project. Mass production usually runs about four to five weeks after all specifications, artwork, dielines, and physical samples are approved. Prepress reviews, printed sample rounds, and shipping to your destination country sit inside or after that mass window.
Can Ace Rolling co-order cones and display boxes together?
Yes. Ace Rolling is a Dongguan, China OEM/ODM and private-label maker of pre-rolled cones, custom rolling papers, and matching retail cartons. A co-order lets one production plan cover both the cone SKU and the shelf-facing display, which usually simplifies MOQ math, sample scheduling, master shipper packing, and export documentation for a single destination.
What files should I send for a display box quote?
Send the cone datasheet, the display dieline or a reference structure, base print artwork in vector format, any separate finish masks, target quantity, destination country, and required documents. Also note whether a printed pre-production sample is required. This lets Ace Rolling confirm cone fit, board weight, print feasibility, MOQ, timing, and quote-dependent pricing accurately.
Are Ace Rolling display boxes RAW, Rizla, or OCB packaging?
No. Ace Rolling does not manufacture RAW, Rizla, or OCB branded packaging. Ace produces custom and private-label retail cartons for pre-rolled cones and rolling papers under buyer brands, with ISO 9001:2015 framework and FSC-certified sourcing available as an option on suitable programs rather than as an automatic feature of every SKU.
